Atomos Shinobi GO

Atomos Shinobi GO

Atomos Shinobi GO is a 5.2-inch 1500-nit on-camera monitor for creators who need a brighter, larger monitoring surface than the camera's rear screen without adding external recording hardware.

The 1920 × 1080 SuperAtom IPS panel accepts HDMI video up to UHD 4K30 and provides waveform, histogram, RGB parade, vectorscope, false colour, zebra, focus peaking and framing guides for exposure, focus and composition decisions on set. The display supports 10-bit processing through 8+2 FRC and can load .Cube LUTs from SD card into eight on-device LUT slots.

At 210g, Shinobi GO is designed to stay compact on mirrorless and lightweight cinema rigs. Power is available from an NP-F/L-Series battery or USB-C PD, while a bottom anti-rotation 1/4-inch-20 mount secures the monitor to compatible camera supports.

Key Features

• 5.2-inch SuperAtom IPS touchscreen
• 1920 × 1080 resolution
• 1500-nit brightness
• 178° horizontal and vertical viewing angle
• HDMI monitoring up to UHD 4K30
• Waveform, histogram, RGB parade and vectorscope
• False colour, zebra and focus peaking
• Eight on-device .Cube LUT slots
• NP-F/L-Series or USB-C PD power

Display & Monitoring Specifications

• Display: 5.2-inch capacitive touchscreen
• Resolution: 1920 × 1080
• Brightness: 1500 nits
• Pixel Density: 427ppi
• Bit Depth: 10-bit via 8+2 FRC
• Colour Gamut: Rec.709
• Monitoring Modes: SDR Native, HDR HLG, HDR PQ, 709 LUT and User LUT
• LUT Support: 17- and 33-point .Cube files

Video & Audio

• Input: 1 × HDMI 1.4
• 4K UHD: 23.98/24/25/29.97/30p
• 4K DCI: Not supported
• 1080p: Up to 60p
• HDMI Audio: 2-channel, 24-bit, input dependent
• Headphone Output: 3.5mm, 2-channel

Physical & Power Specifications

• Dimensions: 151 × 91.5 × 20.8mm; 28.5mm deep with locking cable adaptor attached
• Weight: 210g
• Body: ABS polycarbonate
• Cooling: Passive heat sink
• Mounting: Bottom 1/4-inch-20 with anti-rotation points
• Input Voltage: 6.2–16.8V
• Battery: 1 × NP-F / L-Series
• Continuous Power: NP-F battery or USB-C PD
• Operating Temperature: Up to 40°C

What's Included

• Shinobi GO camera monitor
• USB-C 2.0 cable
• HDMI and USB-C locking cable adaptor
• Quick Start Guide

Compatibility

Shinobi GO is a monitor only and does not record video. Confirm that your camera can output a supported HDMI format and that your chosen battery, USB-C power supply and mounting hardware suit the rig.

Perfect For

• Mirrorless and compact cinema cameras
• Bright on-camera monitoring
• Log/HDR preview with LUT support
• Creators who do not need an external recorder

Shipping Information

Please allow up to 4 to 12 BUSINESS days for delivery. For accurate shipping times, please check our shipping policy here.

Refunds & Returns

Returns are accepted within 30 days in line with our returns policy. Please check our returns policy before purchasing for full eligibility requirements.

Need help choosing an Atomos monitor?

Contact CameraHUB if you need help comparing Shinobi GO with Shinobi II or a Ninja recorder for your camera.